West·Bond Semi-Automatic Model 5700E

 

   

 

   

TIẾNG VIỆT | ENGLISH

Home Products West·Bond Products Semi-Automatic Wire Bonders

Click here to find out more! Model 5700E – Semi-Automatic Single Ball or Ball-Wedge Bonder, Motorized Z Axis

  Click on photo to see larger image.

Click here to request for a quote!



Model 5700E - Semi-Automatic Single Ball or Ball-Wedge Bonder

WEST·BOND’S Model 5700E brings forward the new advances of the "E" Series, notably the placement of all machine mechanism above the work plane to allow unlimited access, and the setting of axis brakes to lock on target. In this model the tool, rather than the work, is moved, both for alignment and for bonding, with the work pre-rotated. Bond heads are built around a 63 kHz ultrasonic transducer and provide full three-way convertibility.

BOND TOOL HEAD this machine is confifured with one bond tool head for single ball or ball-wedge bonding.

 

PROGRAMMING for thirty different device types may be entered into separate buffers. Each device wire may have up to 21 stitch bonds with individual ultrasonic power, time, force, (high or low) and ZAxes elevation control data. Program values, action prompts, and fault diagnostics are exhibited on the easy to read 4 lines, 40 characters LCD sequentially with machine operation.

ADDITIONAL FEATURES include 63 kHz ultrasonics (110Khz Available), orthogonal X-Y-Z axes with pure vertical Z, motion slaved Z encoder, pneumatic braking of X-Y-Z axes during bonding, and built-in tool heat. Available with the base and work platform for tabletop applications, or without base and work platform for mounting above any work handling system.


  • CONTROL LOGIC: Motorola 68000 microprocessor
  • MEMORY: 256KB RAM
  • DATA ENTRY: Keypad -12 keys
  • DISPLAY: 4 line, 40 character LCD
  • DEVICE STORAGE: Battery Backup RAM
  • TOOL Z STROKE: 0.5 inch
  • MOTORIZED Z RESOLUTION: 0.000208 inch per micro-step
  • MANUAL Z ENCODER RESOLUTION: 0.001 inch
  • FORCE RANGE: Adjustable, 10-250 grams
  • BOND FORCE: High / Low Programmable
  • TRANSDUCER: ½ wave, 63 kHz (nominal)
  • ULTRASONICS: Built-in, 8 bit, 5 watts
  • ESD PROTECTION: Protection against Electrostatic Discharge
  • BALL FAULT DETECTION: Ball bonder
  • TAIL AND PULL STROKES: Programmable
  • ANGLED FEED TOOL LENGTH: 0.750 inch
  • VERTICAL FEED TOOL LENGTH: 0.750 inch
  • BALL CAPILLARY LENGTH: 0.625 inch
  • WIRE RANGE: 0.7 to 2 mils, ½ x10 mil gold ribbon (vertical feed)
  • WIRE SPOOL MOUNT: 0.5 inch with ball bearing roller
  • MICROMANIPULATOR: Counterbalanced, single lever X-Y-Z
  • RADIANT TOOL HEAT: Built-in
  • WORK PLATFORM: Fixed height. Adjustable height priced separately
  • MICROSCOPE: Selection available (ESD types available)
  • ILLUMINATOR: Selection available (ESD types available)
  • WORK HOLDERS: Selection available (ESD types available)
  • COMPRESSED AIR: Regulated to 50 psig, is required. Connection is via 1/4-inch tubing
  • ELECTRICITY: 50-60 Hz, single phase, either 115 VAC or 230 VAC
  • DIMENSION: W=24.218" D=22.297" H=11.000" (exclusive of microscope, or H=15.000" to scope eyepieces)
  • WEIGHT: 75 lbs uncreated, or 110 lbs crated

Top


Manual Die Bonders | Manual Wire Bonders | Semi-Automatic Wire Bonders | Automatic Wire Bonders | Pull Test Machines

Click here for more information or contact our offices in Vietnam:
Ho Chi Minh Office
Phone: +84(8) 5446-4789
Email:
hcmc@acrosemi.com
Hanoi Office
Phone: +84(0) 91-225-7173
Email:
hanoi@acrosemi.com

© 2006-2010 AcroSemi Corporation. All rights reserved.