TIẾNG VIỆT | ENGLISH

Home Products Aqueous Technologies Products


Cleaning at the Speed of Sound...The Ultrasonic Advantage

Ultrasonic technology utilizes precisely controlled sound waves to remove un-reflowed solder paste and uncured adhesives from stencils, screens, and misprints. Unlike other technologies that can damage delicate stencils, ultrasonic energy is gentle enough not to damage delicate parts, but is highly effective in the removal of even dried pastes on fine-pitch stencils.

Aqueous Technologies offers 4 models to choose from :

Stencil Washer - ECO Stencil Washer - CLR
Stencil Washer - LD Low Stencil Washer - ZD
Award Winning StencilWasher: Semi-Automatic Stencil Cleaning Systems Specifications (694 KB)


Aqueous Technologies’ semi-automatic ultrasonic stencil cleaning systems are all designed to accommodate stencils, screens, or misprinted assemblies up to 29” x 29” (736mm x 736mm). All models feature stainless steel wash and rinse tanks and a stainless steel deck.

Multiple side-mounted 40 kHz transducers target effective cleaning power onto the stencil or misprint. Transducers include a ten year limited warranty against de-bonding.

All models feature a programmable wash cycle timer for consistent operation. In addition to washing functions, all semi-automatic models feature a hand-held rinse wand and a hand-held airknife for fast and effective drying.

StencilWasher-ECO Filtered Discharge

-- Under $ 10K --
The Most Econimical Full-Function Ultrasonic Stencil Cleaning System Available

StencilWasher-ECO provides fast and efficient solder paste removal at a very economical price.

StencilWasher-ECO is designed to remove all solder paste types including no-clean, rosin, and water soluble. Unlike competitive models, StencilWasher-ECO comes standard-equipped with all of the features required for thorough wash, rinse, dry, and filtration functions, eliminating the need to purchase costly optional items.

StencilWasher-ECO is equipped with powered and filtered wash and rinse tank drain systems for easy and safe discharge. An adjustable wash cycle timer automatically controls the wash tank's immersion transducers. A hand-held rinse wand and airknife provide fast and thorough rinsing and drying functions.

Operation:

  • Semi-Automatic


  • Applications:
  • Non-reflowed (raw) solder paste removal

  • 29" x 29" (736mm x 736mm) stencil capacity

  • 25" (63.5 cm) immersion depth

  • Data Sheet (66 KB)

    Top

    StencilWasher-CLR Closed-Loop (No Discharge)

    Top Seller
    Closed-Loop Wash
    Closed-Loop Rinse
    No Connection to Drain!

    StencilWasher-CLR provides fast and efficient solder paste and adhesive removal.

    StencilWasher-CLR is designed to remove all solder paste types including no-clean, rosin, and water soluble as well as all uncured SMT adhesives. StencilWasher-CLR is equipped with a filtered and recirculated wash system and a fully closed-loop rinse system. All rinse water is captured, filtered, re-deionized, and reused. There is no connection to drain.

    Unlike competitive models, StencilWasher-CLR comes standard-equipped with all of the features required for thorough wash, rinse, dry, filtration, and closed-loop functions, eliminating the need to purchase costly optional items.

    StencilWasher-CLR is equipped with a wash solution heating system, providing a heated wash solution (required for adhesive removal applications). StencilWasher-CLR is also equipped with a wash solution recirculation and filtration system whereby the wash solution is automatically filtered and recirculated for maximum life. A digital wash cycle timer automatically controls the wash tank's immersion transducers, providing precise control over the wash time while displaying the wash time remaining. A DI filter status light indicates when the closed-loop DI filters require changing. Aqueous Technologies provides a convenient DI filter exchange program. A hand-held rinse wand and airknife provide fast and thorough rinsing and drying functions.

    Operation:

  • Semi-Automatic


  • Applications:
  • Non-reflowed solder paste removal

  • Uncured adhesive removal

  • 29" x 29" (736mm x 736mm) stencil capacity

  • 29" (736 cm) immersion depth

  • Data Sheet (1,020 KB)

    Top

    StencilWasher-LD Low Filtered Discharge

    StencilWasher-LD provides fast and efficient solder paste and adhesive removal.

    StencilWasher-LD is designed to remove all solder paste types including no-clean, rosin, and water soluble as well as all uncured SMT adhesives. Unlike competitive models, StencilWasher-LD comes standard-equipped with all of the features required for thorough wash, rinse, dry, and filtration functions, eliminating the need to purchase costly optional items.

    StencilWasher-LD is equipped with a wash solution heating system, providing a heated wash solution (required for adhesive removal applications). StencilWasher-LD is also equipped with a wash solution recirculation and filtration system whereby the wash solution is automatically filtered and recirculated for maximum life. Powered and filtered drain systems provide easy and safe discharge of the wash and rinse tanks. A digital wash cycle timer automatically controls the wash tank's immersion transducers, providing precise control over the wash time while displaying the wash time remaining. A hand-held rinse wand and airknife provide fast and thorough rinsing and drying functions.

    Operation:

  • Semi-Automatic


  • Applications:
  • Non-reflowed solder paste removal

  • Uncured adhesive removal

  • 29" x 29" (736mm x 736mm) stencil capacity

  • 29" (736 cm) immersion depth

  • Data Sheet (694 KB)

    Top

    StencilWasher-ZD Zero Discharge via *Evaporation System

    StencilWasher-ZD provides fast and efficient solder paste and adhesive removal.

    StencilWasher-ZD is designed to remove all solder paste types including no-clean, rosin, and water soluble as well as all uncured SMT adhesives. StencilWasher-ZD is equipped with the Model E101 evaporation system. All process solutions are directed to the evaporator for storage and evaporation. The E101 evaporator provides evaporation rates up to 13 gallons (49 liters) per hour. Its control panel features multiple status indicators including heater status, maximum concentration warning, full warning, and more. A built-in sight glass provides internal fluid level visibility.

    StencilWasher-ZD is equipped with a wash solution heating system, providing a heated wash solution (required for adhesive removal applications). StencilWasher-ZD is also equipped with a wash solution recirculation and filtration system whereby the wash solution is automatically filtered and recirculated for maximum life. Powered and filtered drain systems provide easy and safe discharge of the wash and rinse tanks. A digital wash cycle timer automatically controls the wash tank's immersion transducers, providing precise control over the wash time while displaying the wash time remaining. A hand-held rinse wand and airknife provide fast and thorough rinsing and drying functions.

    Unlike competitive models, StencilWasher-ZD comes standard-equipped with all of the features required for thorough wash, rinse, dry, filtration, and evaporation functions, eliminating the need to purchase costly optional items.

    Operation:

  • Semi-Automatic


  • Applications:
  • Non-reflowed solder paste removal

  • Uncured adhesive removal

  • 29" x 29" (736mm x 736mm) stencil capacity

  • 29" (736 cm) immersion depth

  • Data Sheet (694 KB)






    For more information, please contact us.

    Top
    Trident Series | Stencil Cleaning Systems | Cleanliness Testers | Evaporators | Accessories | Spare parts



    Ho Chi Minh Office
    Phone: +84(8) 5446-4789
    Email:
    hcmc@acrosemi.com
    Hanoi Office
    Phone: +84(0) 91-225-7173
    Email:
    hanoi@acrosemi.com

    © 2006-2010 AcroSemi Corporation. All rights reserved.